For example, gun Finnwik, made in struezaschitnom performance, are used in bathrooms and other wet areas. Heat generators specially Frico designed for fire and agricultural premises. Portable and stationary thermal gun. Portable heat guns are used for temporary or local heating. Main place of their use – construction sites, workshops, garages, etc. Portable heat guns have different capacities ranging from 3 to 30 kW. They all have a robust metal housing that protects the heat gun on the mechanical and chemical (Corrosion) damage. There are models with extra protection for wet, a fire risk.
Some portable heat gun can be mounted on the wall. On the back side of the case of certain models of guns there socket for electrical appliances with voltage of 220 V, which provides additional comfort when working. Stationary heat guns are often the cheapest way to direct heating. They have very high thermal capacity and easy to install. Automation is built into the device, but can also be supplied as separate accessories, such as temperature control unit (night temperature and weekends) and an external thermostat. VENTILATION AND HEAT AT THE SAME TIME.
Together with the stationary fan heaters can be used by the mixer, which allows you to take outside air and mixing it with air in placed in the desired proportions. It performs the tasks of ventilation and heating simultaneously. With automatic temperature control valve and you can change the ratio of the fence outside and inside air. To ensure a balanced ventilation installed exhaust fans, whose work can be synchronized with the system teploventilyatsii. In pomeschneniyah heaters with high ceilings we recommend use with ceiling fans, designed to equalize the temperature inside the building. This decreases the heat loss through the ceiling and optimally engineered thermal power, which provides significant energy savings along with increased comfort. Guns on the used oil. As the name implies, these guns run on waste oil, or working out. Special attention they deserve in garages and service stations. When changing oil in cars accumulate enough fuel to heat generator. Despite the high cost of the boiler costs will pay off pretty quickly at the expense of free fuel. But the station staff will work in a warm comfortable environment, which will necessarily have a positive impact on quality of work. GUN – IT'S NOT THE HEATER. Differences between heat gun from domestic fan heater significant. Domestic heaters warm the air through a hot coil, which is heated red hot. Because of the high temperature (about 1200 degrees Celsius), it burns oxygen, dust and creates a fire hazard. A heat gun is used in a thick steel heater, whose temperature is two to three times lower. Domestic fans are mostly used for heating apartments and office premises and are made of plastic. Heat gun is not afraid of strikes, it can operate in the harshest conditions: at a construction site, in the garage or workshop, as body is made of solid steel plate.
The fluid is chemically aggressive, incompatible with aluminum, thus Choose steel design. Seal – Vi